Iptables Configuration for Bind SSH Squid Samba Apache Ldap Snmp Dhcp Smpt Webmin Tftp Port on Fedora Linux

Iptables Configuration for Bind, SSH, Squid, Samba, Apache, Ldap, Ftp, Snmp, Dhcp, Nfs, Smpt, Webmin, Tftp, vsftpd Port Fedora Redhat Ubuntu Linux
Iptables

Basic Setup:

Here I have mentioned the basic configurations for enabling iptables in fedora linux.

#iptables -L

will list your current iptables configuration.

1)
To allow established sessions to receive traffic

# iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

2) You could start by blocking traffic, but you might be working over SSH, where you would need to allow SSH before blocking everything else.

To allow incoming traffic on the default ssh port (22)

# iptables -A INPUT -p tcp --dport 22 -j ACCEPT


To allow incoming traffic on the default Squid port (3128)

# iptables -A INPUT -p tcp --dport 3128 -j ACCEPT


To allow incoming traffic on the default Apache port 

# iptables -A INPUT -p tcp --dport 80 -j ACCEPT

To allow incoming traffic on the default samba port 

# iptables -A INPUT -p udp --dport 137 -j ACCEPT
# iptables -A INPUT -p udp --dport 138 -j ACCEPT
# iptables -A INPUT -p udp --dport 139 -j ACCEPT
# iptables -A INPUT -p tcp --dport 139 -j ACCEPT
# iptables -A INPUT -p tcp --dport 445 -j ACCEPT  

To allow incoming traffic on the default SNMP port  (161)

# iptables -A INPUT -p tcp --dport 161 -j ACCEPT
# iptables -A INPUT -p udp --dport 161 -j ACCEPT

Now check the current configuration

# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     all  --  anywhere             anywhere            state RELATED,ESTABLISHED
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:http
ACCEPT     tcp  --  anywhere             anywhere            udp dpt:netbios-ns
ACCEPT     tcp  --  anywhere             anywhere            udp dpt:netbios-dgm
ACCEPT     tcp  --  anywhere             anywhere            udp dpt:netbios-ssn
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:netbios-ssn
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:snmp
ACCEPT     tcp  --  anywhere             anywhere            udp dpt:snmp
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:microsoft-ds
ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:squid


3) Once we enabled the above port.we can drop all other incoming ports.

# iptables -A INPUT -j DROP

Now check the rule

# iptables -L


For Interface based access for eth0 specify -i eth0

4) In the final step we have to enable loopback interface. After all the traffic has been dropped. We need to insert this rule before that. Since this is a lot of traffic, we'll insert it as the first rule so it's processed first.

#iptables -I INPUT 1 -i lo -j ACCEPT


5) To enabling logging

# iptables -I INPUT 5 -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7

6) To save this configuration

# iptables-save >  /etc/sysconfig/iptables
or
#service iptables save 
#service iptables start

This configuration will enable ssh port and disable all other incoming ports.
To manually edit iptables config
Also you can manual edit  /etc/sysconfig/iptables

IP Tables configuration for other Services

1) Iptables for default ldap port

# iptables -A INPUT -p tcp --dport 389 -j ACCEPT
# iptables -A INPUT -p tcp --dport 636 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  389 -j ACCEPT

2) Iptables for Backup Exec

3) IP tables for smtp

 #iptables -A INPUT -p tcp --dport 25 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  25 -j ACCEPT 

4) iptables for smtps

 #iptables -A INPUT -p tcp --dport 465 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  465 -j ACCEPT

5) iptables for pop3 , pop3s

 #iptables -A INPUT -p tcp --dport 110 -j ACCEPT
 #iptables -A INPUT -p tcp --dport 995 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  110 -j ACCEPT
-A INPUT -p tcp -m tcp --dport  995 -j ACCEPT

6) iptables for imap , imaps

 #iptables -A INPUT -p tcp --dport 143 -j ACCEPT
 #iptables -A INPUT -p tcp --dport 993 -j ACCEPT 

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  143 -j ACCEPT
-A INPUT -p tcp -m tcp --dport  993 -j ACCEPT

7) iptables for webmin default port

 #iptables -A INPUT -p tcp --dport 10000 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  1000 -j ACCEPT

8) IPtables for named, domain

 #iptables -A INPUT -p tcp --dport 53 -j ACCEPT
 #iptables -A INPUT -p udp --dport 53 -j ACCEPT 

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p tcp -m tcp --dport  53 -j ACCEPT
-A INPUT -p udp -m udp --dport  53 -j ACCEPT

9) iptables  for TFTP server

 #iptables -A INPUT -p udp --dport 69 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p udp -m udp --dport  69 -j ACCEPT

10) iptable configuration for DHCP server


 #iptables -A INPUT -p udp --dport 67 -j ACCEPT 
 #iptables -A INPUT -p udp --dport 68 -j ACCEPT 


or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p udp -m udp --dport  67 -j ACCEPT
-A INPUT -p udp -m udp --dport  68 -j ACCEPT

 11) iptables for NFS server- click here

12) iptables for FTP server - click here

13) iptables  for NTP server

 #iptables -A INPUT -p udp --dport 123 -j ACCEPT

or manually edit /etc/sysconfig/iptables and add the below mentioned line

-A INPUT -p udp -m udp --dport  123 -j ACCEPT



FOLLOW US :-    
   





1 comments :

  1. Beautiful!!! Im almost in tears when I watch this beautiful Iptables script, thanks dude.

    ReplyDelete